Operating Instructions
AceroDURO
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 55
Support: +49 (0)2831/91021-50 15/05/2020
6 . 3
I n s t a l l a t i o n
6 . 3 . 1
Connecti ng the co mpute r
NOTE:
The connection of the PC / computer to the stepper motor must be done according to
the information belonging to the stepper motor controller manual.
6 . 3 . 2
Connecti ng the stepper motor and control cabl e
ATTENTION:
Risk of tripping and falling!
Exposed wires on the ground can lead to tripping or slipping.
•
On the ground laid cables should be covered.
•
Do not lead past corners and sharp edges.
•
Avoid chafing.
•
Visibly mark line course.
Fig. 23: Connections
The connectors of the stepping motor, and control lines (Fig. 23
/ arrow) are labelled.
Personnel:
•
specialist personnel