5
Network Camera_ User manual
< Quick Installation Guide of IP-Installer >
Install the IP Installer on the PC or Laptop. The WinPCap installed together is required software for the
operation of IP-Installer. Please install the WinPCap essentially as when it is not installed, IP Installer won’t
operate.
a.
Starting IP-Installer.
Upon initiation of the IP-Installer, the PC will ask for the selection of proper network adaptor. Click on
proper LAN or WIFI network interface module displayed to highlight the selection and click on
“OK”
to start the program.
b.
Find the product for the configuration
Click on “
Refresh
” button to find the list of the products (IP cameras or video servers) connected on
the same subnet as the PC.
]
Fig. 1-1. IP-Installer Product Search
c.
Assign network parameters needed for connection to the product. Please follow through
the following procedures.
i.
Double click on a product you want to set up.
ii.
Once the parameter Fields as shown Fig 1-2 are activated, set the network parameters.
iii.
Once you fill in the fields, click on
“Set”
to initialize the product with new settings.
