28
Network Camera_ User manual
2.15.
Upgrade & Reset
You can upgrade the device via the IP network.
Upgrade is a process to renew the System Software stored in the non-volatile memory of the system.
You must restart the system by “System Restart” to run the system with the upgraded system software.
Fig. 2-14. Upgrade & Reset
Contents of the upgradable system component should be downloaded from
CNB
’s home page before the
system upgrade is performed.
Item
Description
Manual
Upgrade
Upgrade the system manually.
System S/W
Upgrade
Upgrade the system software installed on the product via the network.
ActiveX
Firmware
Upgrade
Upgrade the system software installed on the product via the network.
Bootloader
Upgrade
Upgrade the bootloader installed on the product via the network after
getting from CNB. Generally it is not required to upgrade the Bootloader.
Add PTZ File
For the PTZ Applicable product, you can use PTZ by uploading extra
protocol. (Applicable product will get it a activated automatically)
System Variable File Upload This loads up setting from a saved “Download template file” file.
