CNB IS2765N Скачать руководство пользователя страница 48

Страница: 48 / 92

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xá |Ñ@åÇxà

Field

Sub Field

Description

User List

Displays list of registered users.

"root" is the system’s administrator.
"root" cannot be added or deleted. Only the password for “root” can be changed.

Add

This adds a new user.
Select “

[Add_User]

” tap in User List Box.

To add a new user, enter User name, Password, and User group then click Add button.

Updated User list can be viewed in User List Box.
- Up to 10 users can be added.
- Authority of different User Groups.

Modify

Modifies information for each user.
Select a user in User Listbox, enter new Password/User Group, and click

Modify

button to save the changes.

Updated detail can be viewed in User Listbox.

Remove

Removes a user.
Select a user in User Listbox and click

Remove

button to remove.

Updated user list can be viewed in User Listbox.

User

Settings

Enable

anonymous

viewer

Turns Anonymous Viewer mode on or off.
When enabled, Web Viewer can be accessed without a log-in prompt.

Save

Applies and saves the configurations.

Reset

Recalls previously saved configurations.

Administrator

: Full control of all the XPEED-XNET system.

Operator

: Control over Viewer, Audio&Video Setup, and Event Configuration.

Viewer

: View camera’s video signal only.

Содержание IS2765N





























































































Результаты поиска

Содержание IS2765N

Отзывы:

Бренды по названию

Популярные бренды

CNB IS2765N, Инструкция по установке и эксплуатации

Результаты поиска

Содержание IS2765N

Отзывы:

Бренды по названию

Популярные бренды