CNB IS2765N, Инструкция по установке и эксплуатации

Страница: 22 / 92

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xá |Ñ@åÇxà
22
3. Operation
⊙
Preset and Pattern Function Pre-Check
• Check how to operate preset and pattern function with web viewer or CMS in advance to operate camera function fully when using web viewer
or CMS.
• Refer to the following table.
<Go Preset> Input[Preset Number] and press [Preset go] button.
<Set Preset> Input[Preset Number] and press [Preset set] button.
<Run Pattern> Input[Pattern number] and press [Pattern run] button.
<Set Pattern> Input[Preset Number] and press [Pattern red] button.
⊙
Starting OSD Menu
• Function : Using the OSD menu, Preset, Pattern, Swing, Group and Alarm I/O function can be configured for each application.
• Enter Menu : press Munu On Button in setting Web page
⊙
Preset
• Function Max. 127 positions can be stored as Preset position. The Preset number can be assigned from 1 to 128, but 95 is reserved for
starting OSD menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up independently for each preset. Label should be blank
and Relay Outputs should be set to OFF as default. “Camera Adjust” should be set “GLOBAL” as default. All characteristics can
be set up in OSD menu.
• Set Preset
< Set Preset> [1~128]
• Run Preset < Go Preset> [1~128]
• Delete Preset To delete Preset, use del del-button or OSD menu
⊙
Swing
• Function By using Swing function, you can make camera to move between 2 Preset positions repeatedly.
When swing function runs, camera moves from the preset assigned as the 1st point to the preset assigned as the 2nd point
in CW(Clockwise) direction. Then camera moves from the preset assigned as the 2nd point to the preset assigned as the 1st
point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd point,
Camera turns on its axis by 360° in CW(Clockwise) direction and then it turns on its axis by 360° in
CCW(Counterclockwise) direction. Speed can be set up from 1°/sec to 180°/sec
• Set Swing To set Swing, use OSD menu
• Run Swing < Run Swing> [1~8]
• Deleting Swing To delete Swing, use OSD menu.