CMT ORANGE TOOLS CMT3000, Руководство по эксплуатации

Страница: 6 / 32

www.cmtorangetools.com
6
Attention: If the work piece is bent or warped, the complete sliders (A) and (B) may block in the
slots of the cross frame (1) , so only perfectly flat material must be used.
Minor semi-axis setting
(Fig. 7)
Rotate the router by 90°. The cross frame (1) must not be rotated! The complete slider (B)
is at the centre of the cross frame). Set the required minor semi-axis length by moving the extension
(4) and (5) in the slider pin (B) ; the complete slider (A) remains tightened. Once the minor semi-
axis has been set, tighten the bolt (7) of the complete slider (B) .
A
B
Fig. 7
A
B
Major axis L1 Shorter axis L2
MIN MAX
3000 2590 2890
2000 1590 1890
1800 1390 1690
1700 1290 1590
1500* 1090 1390
1400 990 1290
1300 890 1190
1200 790 1090
1100 690 990
1030 620 920
900 620 790
800 620 690
730 620 620
Min/Max radius routing with standard equipment
ELLIPSE CUTTING