Issue 6 31/1/14 - CMS Marine - +44 (0) 1452 380100 – [email protected]
Page 15
Troubleshooting
Power Light
Solid Blue = Unit has power
Status Lights
Solid Green = Mains / Shore power operation
Flashing Green = 12/24V battery operation
Flashing Red = 12/24V battery low
Solid Red = Fault - High Temperature
Solid Red with LDR Fitted = System cleaning Deactivated
Transducers Lights
Flashing Yellow = Transducers in operation
Yellow Off = Transducers not running.
Flashing Red = Fault – No current or High current detected on Transducer
5 Flashes and 5 Beeps = Fault – System off due to Error – CONTACT CMS MARINE for Advise
If you see any other combination of lights or you do not have any lights, please contact us.
Maintenance
No regular maintenance of the transducers or system is required.
With all marine electronic installations we advise checking cabling and connections on a periodic basis to
ensure no damage has occurred.
Every 6 Months we would advise checking the transducers are tight and if required a fresh layer of silicon
grease applied to the transducer face and connector. Please note that if you do reapply the additional
silicon that you will need to check the transducers after 24 Hours as a further ¼ turn may be required to
ensure the transducers are tight to the hull.
Thank you
CMS Marine
Содержание SonicSheild III
Страница 1: ...Issue 6...
