AN113
Rev 1.0 | Page 23/34
www.hoperf.com
6. USB Programmer
The USB Programmer is the programming tool for the user to program the configuration into the CMOSTEK NextGenRF
TM
products with
the RFPDK. The evaluation modules should be connected to the PC through the USB Programmer. There are 3
LEDs on the USB Programmer to indicate its working status.
6.1 EM-Connector
The EM-Connector on the USB Programmer is 10-pin, 2.54 mm female connector as shown below.
2
4
6
8
10
9
7
5
3
1
Figure 26. EM-Connector
Table 14. Pin Descriptions of EM-Connector
Pin Number
Pin Functions
CMT2150A
CMT2250(1)A
1
Reserved
CSB
2
GND
GND
3
Reserved
Reserved
4
VDD
VDD
5
CLK
SCL
6
Reserved
Reserved
7
DATA
SDA
8
Reserved
Reserved
9
Reserved
Reserved
10
Reserved
Reserved
6.2 LED Indicators
The USB Programmer has 3 LED indicators to indicate 3 working status of the programmer, which are shown in Figure 26. See
Table 10 for the descriptions of the LEDs.
