CMi 466957, Руководство по эксплуатации

Страница: 53 / 213

4. Important notes
53
GB
466957 V_01/06/2010
– Do not allow other persons, particularly children, to touch the tool or cable. Keep all persons
out of your work area.
5. Store tools in a safe place!
– When tools are not in use they should be stored in a dry, locked room out of children’s reach.
6. Do not overload your tools!
– Tools work better and safer when used within their quoted capacity range.
7. Use the right tool!
– Never use tools or attachments with insufficient power for the job in hand.
– Never use tools on jobs for which they were not intended. For example, do not use a hand-held
circular saw to cut down trees or lop off branches.
8. Wear suitable work clothes!
– Do not wear loose clothing or jewelry as they may get caught in moving parts.
– Non-slip shoes are recommended when working outdoors.
– Wear a hair net if you have long hair.
9. Use personal safety equipment!
– Wear safety goggles
– Use a dust mask when working on dusty jobs
10. Connect up a vacuum extraction system!
– If there are provisions for connecting up a vacuum extraction system, make sure that such a sys-
tem is fitted and in use.
11. Do not mis-use the cable!
– Do not carry the tool by its cable or pull on the cable to remove the plug from the socket-outlet.
Protect the cable from heat, oil and sharp edges.
12. Secure your workpiece!
– Use clamps or a vise to hold the workpiece securely. This is safer than using your hand and will
enable you to operate the machine with both hands.
13. Avoid abnormal working postures!
– Make sure you stand squarely and keep your balance at all times.
14. Look after your tools!
– Keep your tools sharp and clean for better and safer performance.
– Follow the instructions for maintenance work and for changing any attachments.
– Check the plug and cable regularly and, if damaged, have them replaced by an authorized spe-
cialist.
– Check the extension cable regularly and replace it if damaged.
– Keep handles dry and free from oil and grease.
15. Always pull out the power plug:
– When the tool is not being used, before carrying out any maintenance work and when changing
attachments such as blades, bits and cutters of any kind.
16. Remove adjusting keys and wrenches!
– Make sure that all keys and adjusting wrenches are removed from the tool before switching it
on.
17. Avoid unintentional starting!
466957.book Seite 53 Donnerstag, 17. Juni 2010 8:53 08