2
GENERAL INFORMATION
SPECIFICATIONS
The Valustar Electric Chain Hoist is a highly versatile materials
handling device that can be used to lift loads that are within
rated capacity. The mechanical features of these hoists
include an alloy steel lift wheel, overload device (Protector),
hardened steel chain guides, simple two stage gear reduc-
tion, lifetime lubrication, forged steel hooks and lightweight
aluminum frames. The electrical features include hoist-duty
motor, magnetic reversing contactor, rugged control station,
heavy-duty motor brake and control transformer (3 phase
units). Hoists are supplied with a rigid upper hook suspension
as standard. Table 1 summarizes the hoist’s specifications.
CM REPAIR/REPLACEMENT POLICY
All Columbus McKinnon (CM) Valustar Electric Chain Hoists
are inspected and performance tested prior to shipment. If
any properly maintained hoist develops a performance prob-
lem, due to a material or workmanship defect, as verified by
CM, repair or replacement of the unit will be made to the
original purchaser without charge. This repair/replacement
policy applies only to Valustar Hoists installed, maintained
and operated as outlined in this manual, and specifically
excludes parts subject to normal wear, abuse, improper
installation, improper or inadequate maintenance, hostile
environmental effects and unauthorized repairs/modifications.
We reserve the right to change materials or design if, in our
opinion, such changes will improve our product. Abuse,
repair by an unauthorized person, or use of non-CM replace-
ment parts voids the guarantee and could lead to dangerous
operation. For full Terms of Sale, see Sales Order
Acknowledgement. Also, refer to the back cover for
Limitations of Warranties, Remedies and Damages, and
Indemnification and Safe Operation.
Valustar Electric Chain Hoist Specifications
DC
MAX. CAP. LIFTING SPEED MOTOR
MIN. HOOK
POWER SUPPLY
NET WEIGHT
CODE
CODE
MODEL
(TONS)
F.P.M.
H.P.
DISTANCE
VOLTS/PHASE/HERTZ
(POUNDS)
2401
62401
WB
1/4
16
1/4
16-1/2"
115-1-60
51
2402
62402
WB
1/4
16
1/4
16-1/2"
230/460-3-60
61
2413
62413
WE
1/2
8
1/4
19-7/8"
230/460-3-60
72
2412
62412
WE
1/2
8
1/4
19-7/8"
115-1-60
62
2403
62403
WF
1/2
16
1/2
16-1/2"
115-1-60
53
2404
62404
WF
1/2
16
1/2
16-1/2"
230/460-3-60
68
2405
62405
WH
1
8
1/2
19-7/8"
115-1-60
69
2406
62406
WH
1
8
1/2
19-7/8"
230/460-3-60
78
2414
62414
WJ
1/2
32
1
17-5/8"
230/460-3-60
105
2407
62407
WL
1
16
1
17-5/8"
115-1-60
109
2408
62408
WL
1
16
1
17-5/8"
230/460-3-60
106
2409
62409
WR
2
8
1
24-1/2"
115-1-60
129
2410
62410
WR
2
8
1
24-1/2"
230/460-3-60
126
Series 635 Low Headroom Trolley Specifications
MAX. CAP.
TREAD DIA. OF
MIN. RADIUS
(TONS)
FOR USE WITH MODELS
ADJUSTABLE FOR S-BEAMS
WHEELS (IN.)
CURVE (IN.)
1/4 to 1
WB, WE, WF, WH, WJ, WL
4" X 7.7# TO 15" X 50#
3-1/8
24
2
WR
6" X 12.5# TO 18" X 54.7#
4-3/4
24
Series 635 Motor-Driven Trolley Specifications
MAX. CAP.
POWER
TRAVEL
MOTOR
ADJUSTABLE
MIN. RADIUS
(TONS)
FOR USE WITH MODELS
SUPPLY
SPEED (FPM)
H.P.
FOR S-BEAMS
CURVE (IN.)
1/4 to 2
WB, WE, WF, WH, WJ,
115-1-60
75
1/4
6" x 12.5"
30
WL, WR
230-3-60
thru
or 460-3-60
15" x 50#
Table 1
For more information contact: Sievert Crane and Hoist, (708) 771-1600, [email protected], www.sievertcrane.com
