CM LODESTAR, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 9 / 32

8
P/N: 83874-Sub1 Rev AC January 2017
(ENGLISH)
ENGLISH
SUSPENSION COMPONENTS
Item No. Part Number Description Qty.
1 10001745 LUG SUSPENSION 1
2 10001754 HEX HEAD BOLT, M12x1.75THRDx60mm 2
3 10001755 FLAT WASHER, M12 2
4 10001757 NYLOCK NUT, M12x1.75THRD 2
5 10001756 LOCK WASHER, M12 2
6 10002098 RADIO MOUNTING PLATE 1
7 10001741WM RADIO CONTROL SYSTEM, FLEX 4EX, WINDMILL 1
8 10001752 ANTENNA 1
9 CUSTOMER SUPPLIED MOUNTING PLATE 1
10 Supplied with #7 M8 HEX NUT 1
SUSPENSION COMPONENTS
With the lug suspension (1) attached to hoist, assemble as follows and as shown in exploded view on previous page:
1. Align customer supplied mounting plate (9) to lug suspension (1) as shown in the exploded view.
2. Align radio mounting plate (6) to mounting plate (9).
3. Insert M12 bolt (2) through flat washer (3) and insert through both mounting plates and suspension lug (1), with bolt-head and flat
washer on mounting plate (6) side. Repeat for both bolts.
4. Add lock washer (5) on opposite side of bolt. Thread M12 nylon lock nut (4) onto threaded bolt by hand until finger tight.
Repeat for both nuts.
5. Torque M12 nylon lock nut to 70 ft·lbs (95 N·m). Repeat for both.
6. Using included M8 hardware (10), assemble FLEX radio control unit (7) to radio mounting plate.
7. Assemble radio antenna (8) to FLEX radio control unit.
ITEM NO. PART NUMBER DESCRIPTION QTY
1 10001745 LUG SUSPENSION 1
2 10001754 HEX HEAD BOLT, M12x1.75THRDx60mm 2
3 10001755 FLAT WASHER, M12 2
4 10001757 NYLOCK NUT, M12x1.75THRD 2
5 10001756 LOCK WASHER, M12 2
6 10002098B RADIO MOUNTING PLATE 1
7 10001741 FLEX 4EX RADIO CONTROL 1
8 10001752 ANTENNA 1
9 CUSTOMER SUPPLIED MOUNTING PLATE 1
10 --* M8 HEX NUT 1
*Included with item 7, radio control.