Club Car Precedent 2004, Техническое обслуживание и сервис

Страница: 197 / 212

TRANSAXLE (TYPE K) Transaxle Disassembly, Inspection, and Assembly
2004 Precedent IQ System Golf Car Maintenance and Service Manual Page 16b-9
16B
6. To disassemble the intermediate gear assembly, press off together the bearing (18) and the gear (23)
(Figure 16b-4, Page 16b-3). See also Figure 16b-14, Page 16b-9 .
7. Remove key (22) (Figure 16b-4, Page 16b-3). See also Figure 16b-15, Page 16b-9 .
8. Press the bearing (20) off the intermediate gear assembly (Figure 16b-4, Page 16b-3) .
9. Disassemble the differential gear case:
9.1. Bend the bolt lock plates (29) down onto the ring gear (30) (Figure 16b-4, Page 16b-3). See also
Figure 16b-16, Page 16b-9 .
9.2. Remove eight hex bolts (28) that secure the ring gear to the differential case (Figure 16b-4,
Page 16b-3) .
9.3. Remove the ring gear. Retain dowel pin (41) from between the ring gear and differential case for
reassembly.
9.4. Separate the differential gear case housing. If necessary, install two of the hex bolts (removed pre-
viously in step 9.2.) into the differential gear unit and, while holding the unit slightly above the work
area, lightly tap the bolt heads
(Figure 16b-17, Page 16b-9) . Remove the two bolts.
Figure 16b-14 Intermediate Gear Assembly Figure 16b-15 Remove Key
Figure 16b-16 Lock Plate Figure 16b-17 Separate Housing
ARBOR
PRESS RAM
Remove key.
DOWEL PIN
LOCK PLATE