CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com
- 5 -
- 6 -
CLS REVO Basic / Modular / Retail
Glass
Cover plate
2b
2a
6b
6c
6a
Male
Female
7c
7b
7a
1
2
3
4
5
6
7
8
9
1. Take the CLS Revo and unscrew the cover plate and lift off the glass. Repeat this step on the next CLS REVO.
2a. unscrew one of the mounting circles.
b. Lift out the lance. Repeat these steps on the next CLS REVO.
3. Slide the REVOs to each other so the grooves come together.
4. Take the lance and slide it from above in the groove.
5. Carefully place the glass and cove plate back on the CLS REVO and tighten the screws crosswise.
6a. Mount the bracket on the CLS REVO.
b. Place the spacer between the left and right mounting bracket arms.
c. Tighten the spacer by screwing the bolts on the ends of the spacer as shown in picture 6.
7a. Place the CLS REVO Modular connection cable on the first male connector.
b. Connect the CLS REVO Modular feed-through from female to the male connector on the next CLS REVO.
c. Tighten the end plug on the female connector to close the circuit.
8. Put the CLS REVO Modular connection cable in the earth socket.
9. The CLS REVO Modular is ready to be used.
Installation REVO Modular
