Clover TH82, Справочное руководство

Страница: 25 / 68

TH82 Series Reference Manual
25/25
[CAUTION]
*An underline is attached to the full character width including right side character spacing, but not
attached to the space set by HT and 90 o clockwise rotated character by
ESC V
.
*When underline mode is turned off by setting the value of
n
to 0 or 48, the following data is not
underlined and the underline thickness set before the mode is turned off is kept. The default
underline thickness is 1 dot.
*Changing the character size does not affect the current underline thickness.
*This command does not affect Kanji printing.
Ref.
FS -, Turn underline mode on/off for Kanji character.
*Underline mode can also be turned on or off by using
ESC !
, but note that the last received
command is effective. When underline mode is turned off by using
ESC –
after turned on by
ESC !,
underline mode by
ESC !
is turned off.
[DEFAULT]
n=0
ESC 2 Specify 1/6-inch line spacing
[FORMAT]
<1B>H<32>H
[FUNCTION]
The line spacing per line is specified by 1/6 inch.
[DEFAULT]
*The default setting is 4.125mm (33 dots).
ESC 3 Set line spacing
[FORMAT]
<1B>H<33>H<n>
[RANGE]
0 ≦ n ≦ 255
[FUNCTION]
*Sets the line spacing to [n x vertical or horizontal motion unit].
*The line spacing can be set independently in standard mode and in page mode.
[DEFAULT]
Line spacing equivalent to 1/6 inch.
ESC 4 Set logo pattern data
[FORMAT]
<1B>H<34>H<n1><n2> data1 – data720
[RANGE]
1 ≦ n1 ≦ 127
1 ≦ n2 ≦ 127
[FUNCTION]
Sets logo pattern data by this command.
n Function
0,48 Turns off underline mode
1,49 Turns on underline mode of 1-dot thick
2,50 Turns on underline mode of 2-dot thick
This command is invalid.