TH82 Series Reference Manual
18/18
6.2 DESCRIPTION OF THE COMMANDS
NAME
The name of the command.
[FORMAT]
The code sequence. ASCII indicates ASCII equivalents. HEX indicates the
hexadecimal equivalents. < >H represents hexadecimal number, < > represents
decimal number and [ ]k represents a repeat count of k-times.
[RANGE]
Describes an argument value for the command.
[FUNCTION]
Describes the function of the command.
[CAUTION]
Describes a caution as required.
[DEFAULT]
Describes an initial value for the command as required.
6.3 DETAILES
HT
Horizontal Tab
[
FORMAT
]
<09>H
[
FUNCTION
]
Moves the print start position to the next horizontal tab.
[
CAUTION
]
*
The default setting is every 8 characters, (12 x 24).
*
This command is ignored unless the next horizontal tab position has been set.
*
Horizontal tab positions are set with
ESC D
.
FF
Print in page mode and return to standard mode
[FORMAT
]
<0C>H
[FUNCTION]
Prints the data in the printable area collectively and return to the standard mode.
[DETAILES]
*The data is deleted after being printed.
*The printing area is reset to the default setting.
*This command does not cut the paper.
*After
printing,
the
printing
position is set to the beginning of the line.
*This command is enabled only in page mode.
CR
Carriage
Return
[
FORMAT]
<0D>H
[FUNCTION]
*This command prints the data in the print buffer and feeds one line.
*This command begins a line feed if the data has not been printed or has been all space data.
[CAUTION]
*This function can be disabled by DIP switch setting.
LF
and
line
feed
[FORMAT]
<0A>H
[FUNCTION]
*Prints the data in the print buffer and feeds one line.
*This command begins a line feed if the data has not been printed or has been all space data.
[CAUTION]
*After finished prinitng, the next starting position for printing is the biginning of the line.
*The
default
setting
for
the
amount of linefeed is 4.125mm (33 dots).
This command is invalid.
Содержание TH82
Страница 37: ...TH82 Series Reference Manual 37 37...
