Clover TH82, Справочное руководство

Страница: 44 / 68

TH82 Series Reference Manual
44/44
FS r Read NV bit image
FS ! Specify Kanji character print mode
[FORMAT]
<1C>H<21>H<n>
[RANGE]
0 ≦ n ≦ 255
[FUNCTION]
Specifies print mode for Kanji characters.
Value
Bit Function
0 1
0 Undefined - -
1 Undefined - -
2 Double-width mode OFF ON
3 Double-height mode OFF ON
4 Undefined - -
5 Undefined - -
6 Undefined - -
7 Underline mode OFF ON
[CAUTION]
*When both double-width (bit2 = 1) and double-height (bit3 = 1) modes are set, quadruple-size
characters are printed.
*The printer can underline all characters including right and left side character spacing,
FS S
, but
cannot underline the space set by Horizontal tab,
HT
and 90
°
clockwise rotated characters,
ESC V
.
*The thickness of the underline is specified by
FS -
, regardless of the character size.
*When some characters with double or more height are on a line, all the characters on the line are
aligned at the baseline.
*When the size of character font is enlarged to the horizontal direction, it is enlarged to the right
based on the left side of the character.
*The setting of the last received command is effective regarding printing modes which can be
ON/OFF in other commands including character size or underline, etc. Thus, if the printer cancels
double-width and double-height by
FS
! after specifies quadruple by
FS W
, it clears the setting of
FS W
.
[DEFAULT]
n=0
This command is invalid.