USER MANUAL :
DOCUMENT NAME
2.2 CDS546 Nimbus Loop Logger Setup via Remote Configure
Once the remote connection has been established, Cloudworks will automatically download the current setup data and
display it on the screen. This data can be refreshed at any time by pressing the 'Refresh' button in the top
As you can see the parameters are the same as when you configure via the Bluetooth setup option. Again, d
commands are sent to the device only after the parameter setup field has been left. What this means is that while adjusting
a parameter in its input box, no commands are sent to the logger. Once you have completed entering the field and leave it
for the next function, only then will the command be sent.
Should the instruction fail to send or not be acknowledged by the logger, you will get a prompt alerting you to the failed
command. This parameter change should be attempted again.
MANUAL : CDS546 NIMBUS LOOP LOGGER
NAME
CLASSIFICATION
DATE
PAGE
gger Setup via Remote Configure
Once the remote connection has been established, Cloudworks will automatically download the current setup data and
display it on the screen. This data can be refreshed at any time by pressing the 'Refresh' button in the top
As you can see the parameters are the same as when you configure via the Bluetooth setup option. Again, d
commands are sent to the device only after the parameter setup field has been left. What this means is that while adjusting
a parameter in its input box, no commands are sent to the logger. Once you have completed entering the field and leave it
for the next function, only then will the command be sent.
Should the instruction fail to send or not be acknowledged by the logger, you will get a prompt alerting you to the failed
This parameter change should be attempted again.
PAGE
Once the remote connection has been established, Cloudworks will automatically download the current setup data and
display it on the screen. This data can be refreshed at any time by pressing the 'Refresh' button in the top menu.
As you can see the parameters are the same as when you configure via the Bluetooth setup option. Again, data update
commands are sent to the device only after the parameter setup field has been left. What this means is that while adjusting
a parameter in its input box, no commands are sent to the logger. Once you have completed entering the field and leave it
Should the instruction fail to send or not be acknowledged by the logger, you will get a prompt alerting you to the failed
