background image

1.

 

Your new logger comes ready to go.

Simply press and hold the   button until the green LED lights up to start logging.

2.

 

Now place your logger in the location you want to monitor.

Once logging, pressing the    button will light up an LED to give a quick indication of the 

status. It will also add a marker to the data to show that you have checked it.

No alarms will be triggered in the first 30 minutes to allow the logger to settle at the 

monitored conditions.

Red + Green single flash

Logger is ready to start new logging session

Push Start / Stop button

Green single flash

The data logger is currently logging

No alarm has been triggered

No action required

Red single flash

The data logger is currently logging

An alarm has been triggered!

Check status in the PDF

Green double flash

The data logger’s memory is full or the logger has been 

stopped. No alarm was triggered during the session.

Plug your logger in to a PC and download 

the PDF

Red double flash

The data logger’s memory is full or the logger has been 

stopped. An alarm was triggered during the session!

Plug your logger in to a PC, download the PDF 

and check alarm condition

No LEDs flash

The data logger has a flat battery

Contact your distributor for a new logger

Preset high 

and low alarm 

levels

Status LEDs

Push to start/stop

Status mark

START

STATUS

MARK

STOP

CHILLED GOODS

EasyLog

EL-PDF-1 Series

QUICK START GUIDE

START

STATU

S

MARK

STOP

CHILLED GOODS

EasyL

og

START

STATU

S

MARK

STOP

AMBIENT PHARMA

EasyL

og

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - 

TestEquipmentDepot.com 

Reviews: