manualshive.com logo in svg

CLIVET WSAN-XIN 21, Инструкция по установке, эксплуатации и обслуживанию, Страница: 43 / 56

Поделиться
Скачать
CLIVET WSAN-XIN 21 Скачать руководство пользователя страница 43

43 

 

8.11  PROBE POSITION 

Fresh air probe 

A 

A 

8 - MAINTENANCE

 

8.10  AIR COIL 

Contact with the exchanger fins can cause cuts. Wear 
protective gloves to perform the above described operations. 
It is extremely important that the battery gives the maximum 
thermal exchange; therefore, its surface must be cleaned from 
dust and deposits. Remove all impurities from the surface.  
It is extremely important that the battery gives the maximum 
thermal exchange; therefore, its surface must be cleaned from 
dust and deposits. Remove all impurities from the surface.  
Using an air pressure gun, clean the aluminum surface of the 
battery. Be careful to direct the air in the opposite direction of 
the fan air movement.  
Hold the gun parallel to the fins to avoid damages. As an 
alternative, an aspirator can be used to suck impurities from 
the air input side.  
Verify that the aluminum fins are not bent or damaged. In the 
event of damages, contact the authorized assistance center 
and get the battery “ironed out” in order to restore the initial 
condition for an optimal air flow  

Содержание WSAN-XIN 21

























































Отзывы:

Нет отзывов