CLIVET WSA-XEE 182, Инструкция по установке и эксплуатации

Страница: 43 / 60

M02S40N16-00 WSA-XEE 122-402 43
9.2 Single pump
1 Internal exchanger 8 Pressure gauge
3 Purge valve 9 Safety valve
5 drain valve 12 System load safety pressure switch
6 shut-off valve 13 Anti-ice electric heater
7 filter 15 Circulation pump with inverter
9.3 CSVX - Couple of manually opeated shut-off valves
Il kit allows to isolate the water circuit at the inlet and outlet.
It includes:
•
no. 2 cast-iron shut-off butterfly valves with fast fittings and activation lever with a mechanical calibration lock
•
no. 2 of quick connections
9.4 Fresh air probe
The external probe allows to automatically change the unit set point according to the external enthalpy (tempe humidity).
It is then possible to optimize the unit energy efficiency.
Positioning
The sensor has not to be influenced by factors that can false the reading (for ex. direct solar irradiation, exhaust air by fan or other sources,
contact with the unit structure or other sources of heat, accumulations of snow/ice), it has therefore to be placed in a protected place (possibly
to the north), for example in an attic, under a terrace and if it is on a free wall, provide a small roofing.