CLIVET CKN-XHE2i 10.1 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 66

CLIVET CKN-XHE2i 10.1 Скачать руководство пользователя страница 31

Press ▲ ▼ to choose timer T1 - T5.

Press ON/OFF to enable/disable the selected timer.

Press ▲▼ to select each option to be set

Press ▲ ▼ to adjust the temperature and start/end time parameters.

Press OK to confirm the setting and return to the previous page, or press
BACK to delete the setting and return to the previous page .

Weekly timer

Select DAILY TIMER using ▲▼ and press OK

Press ◄ ► ▲ ▼ to select the days.

Press ON/OFF to confirm/delete the selected days

After the selection, press OK to view the next page

Press ▲ ▼ to choose timer T1 - T5.

Press ON/OFF to enable/disable the selected timer.

Press ON/OFF to enable/disable ECO function

Press ▲▼ to select each option to be set

Press ▲ ▼ to adjust the temperature and start/end time parameters.

Press OK to confirm the setting and return to the previous page,

or press BACK to delete the setting and return to the previous page.

Verification of the weekly schedule

Select WEEKLY SCHEDULE CHECK in the TIMER menu

The WEEKLY CHECK allows for viewing, but not modifying, the weekly
schedule.

Press ▲ ▼ to shift from one day of the week to another.

31

«
...
29
30
31
32
33
...
»

Содержание CKN-XHE2i 10.1



































































Отзывы:

Нет отзывов