ClipperCreek ProMountDuo PMD-10T, Руководство по установке

Страница: 6 / 40

Page 6
ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek
, Inc.
IMPORTANT SAFETY INSTRUCTIONS
Before You Begin: Read these instructions completely, including these Important Safety Instructions.
Note to the Installer : Follow Instructions carefully as this unit has self-tapping screws and is not meant to
be disassembled. Some illustrations have been changed to grayscale to show detail for easier assembly. Be
sure to leave these instructions with the user.
Note to the User : Keep these instructions for further reference.
The TESLA
®
Wall Connector and ClipperCreek EVSE (Electric Vehicle Supply Equipment) are designed
with the safety concerns of the end user as an utmost priority; however, the following safety precautions
must be read and followed:
• The EVSE and electrical wiring should be installed by a qualified electrician in accordance with local
electrical codes and ordinances.
• Grounding Instructions - The EVSE should be connected to a grounded, metal, permanent wiring
system; or an equipment-grounding conductor should be run with circuit conductors and connected
to a grounding terminal or lead on the EVSE. Connections to the EVSE should comply with all local
electrical codes and ordinances.
• Call your local service provider anytime a procedural question arises; DO NOT attempt to perform a
procedure you are unsure of.
• Read all installation instructions carefully before performing the pedestal and EVSE installation.