ClipperCreek ProMountDuo PMD-10T, Руководство по установке

Страница: 31 / 40

Page 31
ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek
, Inc.
TESLA
®
EVSE INSTALLATION
1. PREPARE THE TESLA
®
EVSE AND MOUNTING COMPONENTS
a. The TESLA
®
EVSE shipping box contains additional components that will be used to mount the
TESLA
®
EVSE to the PMD-10 Pedestal. Refer to
Figure 33
.
If any of the following components are damaged or missing, please contact TESLA
®
according to the
most recent information in the TESLA
®
EVSE Manual.
WARNING: DO NOT USE THE TOP ENTRY BRACKET MOUNTING SCREWS IN THE TESLA
®
EVSE SHIPPING BOX (DO NOT USE WOOD SCREWS ON THIS PEDESTAL INSTALLATION).
USE ONLY THE 1/4-20, 3/4” LONG TORX T30 SCREW AND WASHER SETS (G) & (H).
ITEM DESCRIPTION (xQuantity):
• P. TESLA
®
EVSE (aka TESLA
®
Wall Connector)
• Q. Top Entry Bracket (x1)
• R. Bottom Entry Power Conduit Plug (x1)
• S. Top Entry Signal Conduit Plug (x1)
• T. Top Entry Power Conduit Plug (x1)
• U. Top Bracket-to-Housing Screw Covers (x2)
• V. Bottom Bracket-to-Housing Screw Covers (x2)
• W. Bottom Bracket-to-Housing Screws (x2)
• X. Top Bracket-to-Housing Screws (x2)
• Y. T20 Sealing Cover Screws (installed, x6)
• Z. T10 Outer Cover Screw (installed, x1)
NOTE: Additional hardware is included in the PMD-10 packaging
(refer to Figure 4 on page 17 of this manual)