Clipper NORTON JUMBO 651 HONDA, Руководство по эксплуатации

Страница: 19 / 24

19
Spark plug
To service the spark plug, follow these
instructions:
•
Visually inspect the spark plug.
Discard the plug if the insulator is
cracked or chipped.
•
Remove carbon or other deposits with
a stiff wire brush.
•
Measure the plug gap with a wire-type
feeler gauge. If necessary, adjust the
gap by bending the side electrode.
•
Make sure the sealing washer is in
good condition; replace the plug if
necessary.
•
Install the plug fingertight to seat the
washer, then tighten with a plug
wrench (an additional ½ turn if a new
plug) to compress the sealing washer.
If you are reusing a plug, tighten 1/8-
1/4 turn after the plug seats.
Fuel line
To service the fuel line, follow these
instructions:
•
Drain the fuel into a suitable container,
and remove the fuel tank.
•
Disconnect the fuel line, and unscrew
the fuel filter from the tank.
•
Clean the filter with solvent, and
check, that the filter screen is
undamaged.
•
Place the O-ring on the filter and
reinstall. Tighten the filter to 2N.m.
After reassembly, check for fuel leaks.
Further maintenance
For further maintenance, please contact the nearest engine maintenance centre.