Clipper NORTON JUMBO 651 HONDA, Руководство по эксплуатации

Страница: 9 / 24

9
Frame (1)
Jig-welded, reinforced and all-steel construction ensures perfect rigidity. The frame includes a large
capacity water tray with drain plug. Frame has built-in lift brackets for easy transportation and is
mounted on 4 wheels, 2 of which have a locking device to secure the machine during cutting.
Cutting head (2)
Jig-welded steel console equipped with pivot bar fixed to frame upright and housed in heavy-duty
bearings. Console supports the motor, the belt drive with its guard and the blade shaft assembly.
Bearings are machined for perfect fit and alignment.
Blade shaft
Precision-machined blade shaft, held in ballbearings and is driven by three heavy-duty V-section
drive belts. The blade shaft assembly is completely enclosed in a cutting head console, accessible
for inspection by way of a removable plate. The removable blade flange is tightened by means of a
hexagonal nut.
Blade guard (3)
Jig-welded steel construction with 650mm-diameter blade capacity, which offers maximum operator
protection and increased visibility of the work piece. Incorporated in the blade guard is an outer
detachable metal cover, which permits easy access to shaft for inspection and blade replacement
when motor is switched off, while fully protecting the blade when in operation.
Down feed and cutting depth adjustment (4)
The spring-loaded cutting head, activated by hand with the grip on the blade guard ensures smooth
lowering of the cutting head for shock-free penetration of the work piece and improved control of the
cutting pressure. A depth-locking device fixed to cutting head and frame enables the operator to set
the cutting head to desired or to maximum cutting depth.
Conveyor cart (5)
Large, heavy-duty and galvanised conveyor cart fitted with water flow-control vents, mounted on 2
locating rollers and 2 flat rollers to give maximum stability and smooth movement. The conveyor cart
is equipped with graduated scale on the backstop and with a guide-a-cut device.
Water cooling system (6)
The coolant system comprises:
•
A powerful, submersible water pump
•
Plastic suction pipe delivering the water from the water pan to the cutting head
•
A large capacity water pan (pan is galvanised) supplied with drain plug
•
A water-tap, fitted to the blade guard, permitting controlled water flow
•
Two water nozzles located on the blade guard ensure adequate flow of water to both sides of
the cutting blade
•
3 water curtains, fixed to frame and blade guard to restrict water spray and to minimise water
loss
Petrol Motor
The Honda GX160 motor is fitted out with an emergency stop button to ensure the safety of the
operator while using the machine.