Clipper NORTON JUMBO 651 HONDA, Руководство по эксплуатации

Страница: 7 / 24

7
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before commencing work
•
Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•
Site the machine on an even, firm and stable base!
•
During work, apply the brakes located on two of the four wheels.
•
Check for correct mounting of the blade regularly.
•
Immediately remove damaged or badly worn blades, as they endanger the operator whilst
rotating.
•
The material to be cut must be held securely in place on the conveyor cart to allow no
movement during cutting operation.
•
Always cut with the blade guard in position.
•
Only fit NORTON diamond blades to the machine! The use of other tools can damage the
machine!
•
Read the blades’ specifications carefully to choose the correct tool for your application.
•
Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.
Petrol powered machines:
•
Always use the fuel advised.
•
In confined areas, exhaust gases should be evacuated and the job site properly aerated.
•
Petrol and diesel machines, which by their nature emit toxic exhaust gases, must not be used in
places prohibited by the Health at Work etc. Act 1974 or which are prohibited by Factory
Inspectors or Safety Officers.
•
Fuel is flammable. Before filling the tank, shut down the engine, extinguish all open flames and
do not smoke. Take care that no petrol is spilled on any motor part. Always wipe up spilled fuel.
•
In case of danger, use the emergency stop button just in front of the machine.
Machine Model Machine Code Weight
Year of production Maximum blade diameter
Machine type Serial number Power Safety standard Blade speed
Bore
diameter