Figure 3-1: Conveyor Cart Assembly
Figure 3-2: Conveyor Removal
Conveyor Cart Assembly
11
The BBM307 Conveyor Cart Assembly is specially designed with the following unique features:
Dust extraction. The rear of the Conveyor Cart is designed to help extract dust out of the back of the
machine when dry cutting
Four heavy duty rolling wheels with bearings, roll smooth and provide for a long life.
Conveyor Cart mounting bracket helps to prevent the Conveyor Cart from falling off the machine
during use or transportation.
Conveyor Cart locking pin, locks the cart so it will not move.
Conveyor Cart Locking Pin:
To lock the Conveyor Cart into position when transporting the machine, roll the Conveyor Cart to the
forward most position (see Figure 3-1 Conveyor Cart Assembly). Then push the lever down and towards
the rail until the Conveyor Cart Locking Pin Engages. The Conveyor Cart may need to be moved
forwards or backwards slightly during this process.
To unlock the Conveyor Cart, reverse the above procedure.
To remove the Conveyor Cart from the machine:
1. Remove the hardware that attaches the Conveyor Cart Mounting Brackets (see Figure 3-2: Conveyor
Cart Removal).
2. Lift the Conveyor Cart off of the rails.
·
·
·
·
NOTE: Machine is shown with the Opitional Dust Guard
