5
Use Only Norton Diamond Blades
Safety Precautions
Important! The following safety precautions must always be observed.
Hazard Symbols
Keep all guards in place when operating any piece of equipment
Keep hands, feet, hair, and clothing away from all rotating parts
Never tamper with the governor components of settings to increase the
maximum speed. Severe personal injury and damage to the motor or
equipment can result if operated at speed above maximum. Always obey the
maximum speed rating of blade.
DO NOT LIFT THE SAW BY THE CUTTING HEAD OR HANDLE BAR
Use Approved:
Eye Protection
Hearing
Protection
Respiratory
Protection
Head Protection
The BBM307/YBM307 is designed as a masonry (Block, and Brick) saw and is not
designed for non-masonry classified material. Use steel center Diamond Blades
Only with this machine.
For best preformance use steel center Diamond
Blades with a soft bond and a low diamond concentration that are specified
for masonry products.
The use of blades with hard bonds or high diamond
concentration on this machine may result in damage to the motor. Clean and
replace the air filter as needed. Failure not to clean or replace the air filter may
result in motor damage. Do not use the machine without the air filter in place.
