Clinton Electronics A-SERIES, Руководство пользователя

Страница: 13 / 18

11
OSD Menu | A
udio | Sy
stem Se
ttings
Audio
• Volume: Raise or Lower the volume for the SD Card content. Alternatively, you can use
the volume buttons on the remote control to set volume level.
• Output: Choose the audio output signal (SD-Audio, Chime). Note: Chime feature not
available or disabled on A-Series devices.
System Settings
• Language: Display the OSD menu in the following languages: English, Korean, French,
Dutch, Italian (English and Spanish only on 27” & 32” models). Note: Changing the Language
does not change the flashing on-screen message. This must be changed in the Special
Control > Message setting.
• OSD Timer: Set the time in seconds before the OSD menu disappears.
• OSD Transparency: Set the transparency level of the OSD menu.
• Key Lock: Turning Key lock on will disable the back panel buttons. Remote control will be
required for future OSD changes.
Special Control-
• Message On/Off: Turn the on-screen message on or off.
• Message: Select from preset on-screen messages (Recording in Progress, Welcome,
Grabacion en Progresso, Bienvenida). There are also two selections that alternate the English
and Spanish versions of these messages (Flash must be set to “ON” for these selections).
• Message Position: (27” & 32” models only) Display message on top or bottom of screen.
• Flash: Turning Flash “ON” enables the on-screen message to flash on and off. If bilingual
message is selected, this option must be “ON” to see message in both languages.
• LED Control: Turn the flashing LED on the front of the display on or off.
• Recall: Pressing Enter while recall is highlighted will recall the display’s default factory
settings. Resets Video, and select System Settings only. Does not effect camera settings.
• DDC SEL: Device service port selection. Note: DDC SEL feature disabled on this device.