CLIMIA CTK 190, Руководство по эксплуатации

Страница: 22 / 32

22
CLIMIA
All moving parts have a low-main-
tenance permanent coat of lubri-
cant. The entire refrigerant system
is designed as a maintenance-free,
hermetically sealed system and
may only be repaired by a special-
ist.
14.0 Care and maintenance
Cleaning the condenser and
evaporator
The unit housing must be opened
to allow the inside of the unit to be
cleaned and to provide access to
electrical components.
•
Clean the condenser and
the evaporator by blowing,
vacuuming or using a soft brush
Do not use water jets!
•
Clean the interior surfaces on
the units, the condensate traps
with hose connection, the fan
and the fan housing carefully
• Check all unit components for
damage and repair if necessary
•
Carefully refit all parts that
were removed in reverse order
• Observe the regular care and
maintenance intervals
•
In accordance with the operat-
ing conditions, the units must
be checked as required but at
least yearly by a specialist to
ensure that they are in a condi-
tion that is safe to use
• Only clean the units with a dry
or damp cloth
Do not use a water jet!
• Never use abrasive or solvent-
based cleaners
•
Even with heavy contamination,
use only suitable cleaners
• Check the inlet and outlet grille
for contamination on a regular
basis
Clean or replace if required!
NOTE
Regular care and maintenance
is fundamental to a long service
life and fault-free operation of
the unit .
CAUTION!
Before undertaking any work on
the units, the power plug must be
removed from the mains socket.
NOTE
Adjustment and maintenance
work may only be carried out
by authorised and qualified
technicians.
NOTE
When cleaning the exchanger,
particular care must be taken
because the fine aluminium fins
bend very easily.
CAUTION!
An electrical safety check must
be carried out in accordance with
VDE 0701 after any work on the
units.