CLIMIA CMK 2950, Руководство по эксплуатации

Страница: 16 / 24

Ensure that units and components
are disposed of in accordance with
local regulations, e.g. through
authorised disposal and recycling
specialists or at collection points.
Intakt GmbH or your contractual
partner will be pleased to provide a
list of certified firms in your area.
11.0 Care and maintenance
Regular care and observation
of some basic points will ensure
trouble-free operation and a long
service life.
• Only clean the unit using a damp
cloth.
Do not use a jet of water.
• Do not use any caustic, abrasive
or solvent-based cleaning
products.
• Only use suitable cleaning
agents, even in the event of
severe soiling.
• Ensure that no moisture gets
into the unit. Clean the exhaust
air and outlet openings regularly
and thoroughly.
This is where dirt most often
collects first.
• Clean the air filter on the indoor
unit at regular intervals, and
more frequently if necessary.
• We recommend that you take
out a maintenance contract with
an appropriate specialist firm.
This will guarantee that your
equipment always operates
reliably!
Permanent shutdown
Fig. 7 Changing the filter
Fig. 8 Cleaning with lukewarm water
Filter cleaning
The unit is equipped with an air
filter. This can be withdrawn from
the rear of the unit. The filter must
be cleaned at regular intervals.
Clean the air filter at intervals of no
more than 100 operating hours.
Reduce this interval in the case of
heavily contaminated air.
1. Switch the unit off and pull out
the power plug.
2. Pull the filter out of the unit
(Fig.
7) .
3. Clean the dust off the filter. Use
a vacuum cleaner in the event of
slight soiling.
4. In the event of heavy soiling,
clean the filter carefully in
lukewarm water
(Fig. 8) .
5. Allow the filter to dry in the air.
6. Insert the filter back into the
unit.
7. Ensure that the filter is dry and
undamaged.
CAUTION!
Never operate the indoor unit
without the original filter.
Without the filter, the heat
exchanger fins on the indoor unit
will be contaminated and the
unit will become less efficient.
CAUTION!
Care and maintenance work may
only be carried out if the unit
is disconnected from electrical
power.
6. Store the unit in an upright
position in a cool, dry and dust-
free location protected from
direct sunlight. Cover the unit
with a synthetic cover to protect
it against dust if desired.
NOTE
Check the level of dirt on the heat
exchanger fins as required.
CLIMIA
16