CLIMIA CMK 2600, Руководство по эксплуатации

Страница: 6 / 20

The units are shipped in sturdy
transport packaging. Check the
unit immediately after delivery
and make a note of any damage
(please take photos of the damage)
or missing parts on the delivery note.
Inform the forwarding agent and
contractual partner.
Please keep the packaging safely for
any returns.
Claims under guarantee made at a
later date will not be accepted.
Control panel
Recessed grip
The unit is particularly well suited to
flexible use.
The local room air conditioner
comprises a floor-standing unit
for the indoor area and an exhaust
air hose to conduct the heat away.
The indoor unit extracts the heat
from the room to be cooled by
means of an evaporator (heat
exchanger) and transfers it to the
internal cooling cycle. This releases
the heat back to the outside via
another heat exchanger (condenser)
by means of the flexible exhaust air
hose.
The condensate arising during
cooling mode is continually drained
off via the condenser by means of
a condensate pump located in the
unit - the condenser evaporates the
condensate and discharges it to the
outside via the exhaust air hose.
The unit filters and dehumidifies the
air thereby creating a comfortable
room climate. It works fully
automatically and offers numerous
additional options thanks to
its microprocessor controller.
The operation of the unit can be
conveniently operated by means
of the infra-red remote control
included.
6.0 Unit description
5.0 Transportation and
packaging
Fig. 2 Rear view
IR receiver
Ventilation louvres
Transport castors
Air filter, recirculation
Air inlet, recirculation
Air duct connection
Exhaust air hose
Air outlet
Exhaust air
Condensate drainage
connection (only required
for "Dehumidifying" mode)
Air inlet, exhaust air
Air outlet
Recirculation
Fin locking
vertical
Emergency emptying of condensate
Fig. 1 Front view
CLIMIA
6