CLIMET INSTRUMENTS CI-90A Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

CLIMET INSTRUMENTS CI-90A Скачать руководство пользователя страница 7

CI-90A User’s Manual

Page 1

Section 1: Introduction

1.1 Caution

Service by qualified personnel only.

1.2 Notes

1.2.1 Notice

The CI-90A should never be operated with the transit lid installed. This may result in

damage to the blower or other internal components.

1.2.2 Battery life

Batteries offer portability, but all batteries have limited life. The choice of Nickel

Metal Hydride batteries offers greater power density than comparable Nickel-Cadmium
batteries, and the elimination of cadmium from the battery chemistry reduces
environmental concerns associated with NI-Cad batteries. In other respects, including
long-term life, the batteries are similar. Manufacturers of NI-MH batteries recommend
that they be stored

open circuit

(i.e., disconnected) if stored for extended periods.

1.2.3 Calibration interval

The CI-90A is based on technology proven in a variety of reliable, stable instruments,

and can be expected to maintain its calibration within specified tolerances for several
years. However, it is recommended that the instrument be calibrated annually to insure
the accuracy of the volume of air sampled.

1.3 Unpacking and installation

1.3.1 Unpacking

The CI-90A is packed in a specially designed shipping container, which has been

tested to withstand normal amounts of shock and vibration in accordance with the
National Safe Transit Association (NSTA). Save the shipping box to minimize the
chance of shipping damage when the instrument needs to be returned for calibration or
repair.

After unpacking the CI-90A, inspect the instrument for any signs of damage. If there is

any damage, you should file a claim with the shipping company and contact CLiMET
Instruments.

«
...
5
6
7
8
9
...
»

Содержание CI-90A













































Отзывы:

Нет отзывов