32
CM7015
To move to the outdoor temperature calibration, instead of pressing
SNOOZE/LIGHT
,
press the
SET
key again and this parameter will now begin to flash. As before, you can
use the
or
keys to enter an adjustment value as desired. Pressing the
SET
key
again will allow you to toggle between any available CM7 Sensors to adjust readings
from different channels.
To revert back to the true readings for any of these measurements in future, follow the
same process and adjust these values back to zero.
To leave the calibration mode and return back to the home screen, press the
SNOOZE/
LIGHT
button at any time.
Humidity Calibration
While on the home screen, press and hold the
SET
&
HISTORY
keys together for 5
seconds to enter the humidity calibration mode – the indoor humidity reading will begin
to flash.
While this is flashing, pressing the
or
keys will decrease/increase an adjustment
value in small amounts, which will then be applied to the reading measured by the
console. Press the
SNOOZE/LIGHT
key to select this value and return to the home
screen.
To move to the outdoor humidity calibration, instead of pressing
SNOOZE/LIGHT
, press
the
SET
key again and this parameter will now begin to flash. As before, you can use
the
or
keys to enter an adjustment value as desired. Pressing the
SET
key again
will allow you to toggle between any available CM7 Sensors to adjust readings from
different channels.
To revert back to the true readings for any of these measurements in future, follow the
same process and adjust these values back to zero.
To leave the calibration mode and return back to the home screen, press the
SNOOZE/
LIGHT
button at any time.
