18
CM7015
If your Rain Gauge signal is lost – press and hold the
CHANNEL
key for 3 seconds to
enter the Sensor Search Mode as before. The Channel ID will be flashing, but this time
press the
key once to scroll to the ‘RAIN’ setting instead. Once this option is flashing,
press the
SET
key to prompt the Display Console to seek to re-establish a connection
with your Rain Gauge. The searching icon
will be shown on the Rain section of your
console until the signal is received, at which point your rainfall readings will return.
Finally – if you wish to prompt your Display Console to refresh all connections with your
Rain Gauge and all CM7 Sensors – press and hold the
CHANNEL
key for 3 seconds to
enter the Sensor Search Mode. This time, press the
key twice to scroll to the ‘ALL’
option. Press the
SET
key now to prompt the Display Console to seek to re-establish
a connection with all active channels. Searching icons
will be shown next to your
rainfall readings and the remote channel icon for a period of up to 10 minutes while the
console is looking to reacquire all active signals. This procedure can be useful when
setting up multiple CM7 Sensors at one time.
Setup Menu
Once the Display Console is receiving information from your Rain Gauge and CM7
Sensor, the most important thing you’ll need to do is configure the Display Console by
running through the Setup Menu. This will allow you to set the time and date of the
console, as well as tweak details such as preferred units of measurement to your liking.
You can leave the Setup Menu at any time by pressing the
SNOOZE/LIGHT
key found on
top of the console, which will bring you back to the home screen.
To enter the Setup Menu, push and hold the
SET
key for 3 seconds and the console
will beep, with the first setting (12/24 Hour Time Format) flashing in the top section
of the screen. Pressing the
SET
key now will scroll through to the next option in the
Setup Menu, eventually returning back to the home screen. While each different option
is flashing, using the
(
HISTORY
) or
(
CHANNEL
) keys will allow you to toggle
between various settings, or increase/decrease values as needed. If no key is pressed
for 30 seconds at any point, the Setup Menu will close and your console will revert to
the home screen.
