Climax VST-2752, Руководство пользователя, Страница: 5 / 55

2
1.2. Introduction
VST-2752 Control Panel features both IP and
3G mobile network reporting functions:
The advanced IP Security System with fully
integrated TCP/IP technology and Ethernet
connectivity is able to take full advantage of
new advances in IP Home Security and Home
Automation and multi-path signalling.
SMS remote programming and command is
also available to configure your panel by SMS
messages. You can also use our Vesta EZ
Home smartphone applications to send the
SMS commands easily for basic panel
functions.

3G SIM card
The Control Panel features built-in 3G mobile
network facility to report to the Monitoring
Station. To use this function, a SIM card is
required.
<
<
N
N
O
O
T
T
E
E
>
>

Please disable the SIM card PIN code
before inserting into the Control Panel.

Please make sure the SIM card data
transfer and MMS functions are
activated

Unlock the SIM card base by sliding the
cover toward OPEN direction.

Spring open the SIM card slot and insert
your new SIM card.

Replace the SIM slot onto the base lightly.

Remember to lock the SIM card base by
sliding the cover toward LOCK direction.
1.3. The Power Supply
An AC power adaptor is required to connect to
a wall outlet. Be sure only to use an adaptor
with the appropriate AC voltage rating to
prevent component damage.
A DC 9V output and 1A switching power is
generally used to power the Control Panel.

Rechargeable Battery

In addition to the adapter, there is a
rechargeable battery inside the
Control Panel that serves as a backup
powering source in case of any power
failure condition.

During normal operation, the AC
power adapter is used to supply
power to the Control Panel and at the
same time recharge the battery. It
takes approximately 72 hours to fully
charge the battery.

Battery Switch is set as OFF by
factory default, the battery will not be
charged when AC power is connected,
nor will it serve as a back-up power
source when AC power is missing.
You need to switch the battery to
ON
after supplying AC power to Control
Panel.
1.4. How to Install the Control
Panel
The easiest way to get to know the system
and get it up and running quickly is to get
all the devices and accessories
programmed on a tabletop before locating
and mounting them.
The Control Panel can be mounted on the wall
or wherever desired. Ensure the Control Panel
is fitted at approximately chest height where
the display can be easily seen and the keypad
convenient to operate.
Step 1. Using the 2 holes of the Wall
Mounting Bracket as a template,
mark off the holes’ positions.
Step 2. Connect AC power adaptor, Ethernet
cable and insert SIM card.
Step 3. Hook the Control Panel onto the Wall
Mounting Bracket.
Step 4. Plug the AC power adaptor into wall
socket, the Control Panel Green LED
will light up along with 2 beeps to
indicate the panel is now operational.
1.5. Three – Level Passwords
In order to provide maximum security when
operating the system, the Control Panel offers
different levels of authorization for various
situations.