Climax KM4000, Руководство по эксплуатации

Страница: 17 / 78

P/N: 16328, Rev. 7 Page 7
Figure 5 - Air valves
CAUTION
Avoid damaging the air motor and voiding your
warranty by routing incoming air through the
filter and lubricator.
For machines with air motors, if the machine
stops moving unexpectedly, lock out the
pneumatic safety valve located at the filter
lubricator assembly before performing any
troubleshooting.
CAUTION
Using air that is not filtered and lubricated can
damage the air motor. Avoid damage by routing
incoming air through the air filter and lubricator.
Hydraulic Power
A wide variety of hydraulic power options are available. Please contact your Climax sales
representative for details.
The table below lists operating specifications of the hydraulically powered version of the KM4000
using standard mineral-based hydraulic oil.
Maximum working pressure 2050 psi (140 Bar)
Working temperature range -3

C to 68

C
Flow rate 21 L/min
Down to
close
Up to
open
Faster
Slower
A
ir in
Air o
ut
Needle valve