Climax Hybrid-Panel Series, Руководство пользователя

Страница: 55 / 110

52
Step 6. Edit your device setting and information according to instruction below. Click
―
OK
‖ to
save changes when finished. Alternatively, click
―
Default
‖ to reset all parameters to
default values or click
―
Reset
‖ to re-enter all the information.

Name: Enter a name for the device.

Area: Select the area which the device belongs to.

Zone: Select the Device zone number.

Attribute List:
The attribute list determines panel behavior when the panel receives trigger signal from
the device. There are
General Attribute:

Permanentlyt Bypass
This function allows user to permanently deactivate (bypass) the selected device.

If bypassed, then the Control Panel will not respond at all when the sensor is
triggered.

If bypassed, the system can be armed directly regardless the device
’s fault
situation. However, its fault situation will still be monitored, logged and displayed
in the webpage.

Latch report
This function ONLY applies to Remote Control or Door Contact with Set/Unset attribute
enabled.

Latch Report ON: When the device is used to change systm arm mode, the
Control Panel will report the arm/disarm action by the particular device.

Latch Report OFF: When the device is used to change systm arm mode, the
Control Panel will not report the arm/disarm action by the particular device.