Climax Hybrid-Panel Series, Руководство пользователя

Страница: 15 / 110

12
Step 6. Peel the release film of the tape. Apply it to your battery pack and press firmly for 30
seconds to ensure good contact. Please avoid applying the tape on uneven surface or
re-apply it.
<NOTE>

The images below illustrate where users should apply the Velcro tape(s) for different
battery type and capacity.

For Hybrid-Panel-1-LA: apply the Velcro tapes to the back of the battery pack for
long-term attachment

For Hybrid-Panel-1-NH & Hybrid-Panel-1B-NH: ensure the battery connector plug is on
the top LEFT-HAND side of the battery pack when the Velcro tape(s) is applied for
battery connection flexibility.

For Hybrid-Panel-3 & Hybrid-Panel-3B: ensure the battery connector plug is on the
bottom RIGHT-HAND side of the battery pack when the Velcro tape(s) is applied for
battery connection flexibility.

Hybrid-Panel-3 & Hybrid-Panel-3B can support an additional expansion board. To
install the expansion board, insert the cable attached to the expansion board into the
connector as the picture below.