Climax Hybrid-Panel Series, Руководство пользователя

Страница: 11 / 110

8
18 PGM Port
To be used as a voltage output port or a dry contact relay output depending on J24 jumper
settings. Please refer to
3.3 Hardware Installation for detail.
19 SLA Backup Connection Battery Terminal (not hot swappable)
Connect to SLA battery pack, up to two battery packs can be connected.
20 Alternative Hole for Wiring Management x 2
21 Built-in Power Unit (Input: 16 ~ 18VAC 40VA, Output: 12VDC/2A)
Please refer to 3.3 Hardware Installation for detail.

Don
’t use Built-in Power Unit and DC-Jack together.

Ensure to turn off all power supplies including AC power adaptor, Built-in Power
Unit, and SLA/NiMH Battery before connecting or removing cables or wires.
22 Wire Saddle
To be used for securing power cables.
23 NiMH Battery Connector
Connect to 7.2V 4500mAh or 2300mAh NiMH rechargeable battery pack.
24 Battery Switch
Switch
to ―ON‖ for the battery to be charged when AC power is connected and serve as a
backup power source when AC power is missing.
25 Built-in Power Unit Connector
26 DC Jack
Connect to 12VDC 2A power supply. Don
’t use Built-in Power Unit and DC-Jack together.
27 Zone Terminal & 12V Auxiliary Voltage Output Terminal & GND Terminal
Zone 1-16 Hardwired Input Zones, supporting up to 400mA for all hardwired zones,
auxiliary output and KP-35-COMBO. Please refer to
3.3 Hardware Installation for detail.
28 4G-LTE External Antenna Terminal
29 Learn Button
To be used for local learning or local reset.
30 Tamper Switch
To protect the Control Panel against disallowed case opening or removal.
31 USB Port (optional)
When connecting a USB dongle into the port, it is suggested to use a USB extension cable.
There is no USB Port for the panel if it is built in 4G and Wi-Fi.
32 Micro-SIM Card Socket (not hot swappable)
33 Ethernet Port
34 Room for Backup Battery
(For Hybrid-Panel-1-LA): room for installing 12V 7A or 12V 4A SLA battery pack to serve as
a backup power source. Note: ensure to replace the battery pack within 5 years from the
date of manufacture, please refer to
NFPA-72, 2002 Edition for detail.
(For Hybrid-Panel-1-NH): room for installing NiMH rechargeable battery pack to serve as a
backup power source.
(For Hybrid-Panel-1B-NH): with built-in 7.2V 2300mAh or 4500mAh NiMH rechargeable