Climax BW5000, Руководство по эксплуатации

Страница: 49 / 124

P/N 68191, Rev. 4 Page 45
3. Undo the motor lead connections in the space revealed when the Motor shroud is
removed
4. Remove the two Allen Head cap screws which fasten the steel plate the main block.
(Bubble #2 Fig 18) Do not remove the steel plate from the step motor.
5. Slide the step motor off of the main block.( P/N 20202)
6. Remove the main block from the Aux Slide Guide Rod
Perform intended maintenance, and clean the main block slide bore.
Before reassembling, it is important to grease the end of the pinion sparingly.
Do not grease the actual pinion teeth, as grease on the pinion teeth will transfer to the rack,
causing dirt and grit to collect.
Figure 18 Removal of Step Assembly