OPERATING THE UNIT USING THE REMOTE CONTROL
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
13
14
2) Mode Selection - Press the MODE Button repeatedly to cycle between the
different modes: Auto, Air Conditioner, Dehumidifier, Fan only, and Heater mode. The
upper left square on the Remote control dis- play will light up showing which mode is
selected. In Air Conditioner mode the display will show “COOL”, in Heating mode the
display will show “HEAT”, in Dehumidifier mode the display will show “DRY”, in Fan
mode the display will show “FAN”, and in Auto mode the display will show “AUTO”.
3) Fan Speed - Press the FAN speed button to cycle through high, medium, and low
fan speeds. The dis- play on the remote control will show High, Medium, Low, under
the “SPEED” label on the remote control LCD display. There is an additional auto
speed setting that is enabled in only heating and cooling modes. This speed is next
setting after low when pressing the FAN speed button on the remote control. The
speeds will cycle through in this order: High, Medium, Low, Auto. Each change in
speed will be associated with a “beep” sound from the unit. The remote control will
not display “AUTO” under the speed label. Once Auto fan speed is selected the unit
will beep and there will not be a fan speed displayed on the remote control.
4) Temperature Setting - When the unit is in Air Conditioner or Heating mode you can
select your desired temperature. Press the or to select your desired temperature
setting. The temperature on the LCD dis- play on the remote control will increase or
decrease accordingly. Pressing the and buttons simultaneously will change the
temperature select between °F and °C.
5) SLEEP MODE - See “SLEEP MODE” on page 11.
6) SWING - To turn on the oscillation, press the SWING button on the remote control.
Once you press SWING, the louvers on the unit will oscillate up and down. The bottom
left square of the remote control display will show the “ “ icon when oscillation
(SWING) is selected.
7) TIMER - To program the timer, first press the T-ON button. Once T-ON is pressed
the auto-on timer will blink in the bottom right rectangle of the remote control display.
Press the MIN and HOUR buttons to change the clock to the desired time for the unit
to automatically turn on. The minutes will increase by 10 with each press of the MIN
button and the hours will increase by 1 with each press of the HOUR button. Press
the T-OFF button and the remote control display will flash the desired auto-off timer.
Press the MIN and HOUR buttons to change the clock to the desired time for the unit
to automatically turn off. The timer is set when the auto-off time stops flashing and the
words “ON” and “OFF” are displayed next to the time.
8) CLOCK - To set the clock on the remote control, hold down either the MIN or
HOUR button until the displayed time flashes on the remote control display. Change
the minutes by pressing the MIN button and change the hours by pressing the HOUR
button.
REMOTE CONTROL OPERATING INSTRUCTIONS
1) Power On and Off - If the unit is already on, press the POWER (I/O) button on the
remote while point- ing the remote away from the unit. This will turn the remote on. If
the unit is off, now press the POWER (I/O) button once to manually turn the unit on.
Press the Power button once more to turn the unit off. When you press the POWER
button the upper right square on the remote control LCD Display will light up. When in
Air Conditioner, Heating, and Auto mode, the selected temperature will appear on the
remote control display. When the unit is in Fan mode and Dehumidifier mode you will
see the “- -” icon instead of the set temperature. This shows that temperature selec-
tion is not available when the unit is in Fan or Dehumidifier mode.
Mode
Button
Fan
Speed
Swing
(Louver Oscillation)
Sleep
Button
Hour
Selector
LCD
Display
Power
Button
Temp
Setting
Timer On
Timer Off
Minute
Selector
