OPERATING INSTRUCTIONS
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
9
10
CONTROL PANEL BUTTONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press
the POWER button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different
modes: Auto mode, Air Conditioner, Dehumidifier, Fan only, and Heater.
3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan
speeds: High, Medium, and Low. The fan speed can be visually distinguished by the
speed of the fan icon on the front panel. There is an additional auto speed setting that is
enabled in only heating and cooling modes. This speed is next setting after low when
pressing the speed control button. The speeds will cycle through in this order: High,
Medium, Low, Auto. Each change in speed will be associated with a “beep” sound from
the unit.
4) Temperature - Select the desired temperature by pressing either or key when using
the unit in cooling or heating mode. The temperature indicator flashes to display the desired
temperature setting. After the temperature is set, the unit will display this temperature
setting until it is changed by the user. The multi-color display shows temperature in Celsius
or Fahrenheit. Pressing the and buttons simultaneously will change the temperature
select between °F and °C.
5) Timer - To program the timer, press the TIMER ON button until the display shows a
flashing “ ”. Press the or buttons to change the clock to the desired time for the
unit to automatically turn on.
Press the TIMER OFF button and the display on the unit will flash “ ”. Press the or
buttons to change the clock to the desired time for the unit to automatically turn off. The
TIMER OFF indicator will flash for 3 seconds to activate the times you programmed.
NOTE: The timer will also remember your settings when it is set. If you set the timer while in
Air Conditioning mode, the timer will automatically turn the unit on and off in air
conditioning mode according to the desired programmed times. The timer will also
remember the temperature settings, fan speed, and oscillation setting. The timer works
when the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan mode, and
Auto mode
OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1) Install the exhaust hoses and window kit properly (see pages 5,6 & 7).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the Mode button until the “ ” icon appears on the Multi-color display
5) Press the or buttons until the desired room temperature appears on the control panel
display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).
6) Select the desired fan speed by pressing the FAN SPEED button.
NOTE: During hot days, the unit will cool the room most efficiently by setting the tem-
perature at the lowest setting and the fan speed on high. Reducing the length of the
exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight
to a minimum will also improve the cooling efficiency.
NOTE: When the unit is running on cooling mode, the exhaust hoses are required and
must be vented outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hoses and window kit properly (see pages 5,6 & 7).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER Button on the control panel.
4) Press the MODE button until the “ ” appears on the control panel display.
NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools
room slightly during the dehumidification. Keep the windows and doors closed to aid
the effectiveness of the unit in removing the moisture from the room.
NOTE: When the unit is running on dehumidifier mode, the exhaust hoses are required
and must be vented outside using the supplied window kit.
NOTE: The unit will not perform in dehumidifier mode when the room temperature is
lower than 61°F .
Fan Mode
1) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the POWER button on the control panel.
3) Press the MODE button until the “ ” icon appears on the control panel display.
4) Select the fan speed by pressing the FAN SPEED button.
5) To circulate more air, press the SWING button on the remote control. The louvers
will oscillate which moves the louvers up and down to increase air circulation.
NOTE: It is not necessary for the exhaust hoses and window kit to be installed to
operate the unit in fan mode.
Heating Mode
1) Install the exhaust hoses and window kit properly (see pages 5,6 & 7).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the MODE button until the “ “ icon appears on the control panel display.
5) Press the or buttons until the desired room temperature appears on the
control panel display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).
6) Select the fan speed by pressing the FAN SPEED button. It is recommended to set
the fan speed to low.
NOTE: When heat mode is selected, the unit will shut down for 3-5 minutes, then start
in heating mode.
NOTE: When the unit is running on heating mode, the exhaust hoses are required and
must be vented outside using the supplied window kit.
