AT C 3 2 U 0 3 C o m m u n i c a t i n g , P ro g r a m m a b l e T h e r m o s t a t - I O M
R e v. : N o v e m b e r 3 , 2 0 1 7
10
G e o t h e r m a l H e a t P u m p S y s t e m s
OPTION SELECTION
TT026 S N - - - - - 1 2 3 4
TT026 S N - - - - - 5 6 7 8
TT038 S N - - - - - 9 0 1 2
PREVIOUS SELECT
4.0 Accessory Confi guration
A service message will fl ash at the top of the Main screen
when a service timer expires to alert the user that it is time to
service these options. Refer to DXM2 AOM for instructions on
confi guring DIP switches to confi gure accessories. Follow the
instructions below to set service timers.
5.0 Input Dealer Information
Enter/edit the Dealer Information settings, including Brand
Name, Model Number, Serial Number, Contractor Name, and
Contractor Phone number, using the up/down arrow buttons.
Press the center button to save changes.
4.1 AIR
FILTER
This feature displays an alert to remind the user to change
the air fi lter after the selected time has passed.
Adjust the Air Filter Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off) –
valid range:
Off, 400 to 3600 hours (in 100 hour increments
)
• Calendar Time (default Off) –
valid range: Off, 3
to 48 months (in 3 month increments)
4.2 HUMIDIFIER
This feature displays an alert to remind the user to change
the humidifi er pad after the selected time has passed.
Adjust the Humidifi er Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off)
– valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off)
– valid range: Off, 3
to 24 months (in 3 month increments)
4.3 UV
LAMP
This feature displays an alert to remind the user to change
the UV lamps after the selected time has passed.
Adjust the UV Lamp Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off)
– valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off)
– valid range: Off, 3
to 48 months (in 3 month increments)
4.4 AIR
CLEANER
This feature displays an alert to remind the user to clean the
fi lter(s) after the selected time has passed.
Adjust the Air Cleaner Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off)
– valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off) –
valid range: Off, 3
to 24 months (in 3 month increments)
3.6.2
MULTI-UNIT OPTION SELECTION
In section 3.2, when an installer selects “Option Selection”
from the System Confi guration menu, the installer may
choose the unit to confi gure by the last 4 digits of its serial
number from the following screen.
3.6.3
Multi-Unit, Unit, Pump, & Valve Confi guration
To confi gure Unit, Pump, and Valve options in sections 3.3-
3.5, the thermostat must be connected to only one unit at a
time.
BRAND NAME
CLIMATEMASTER
MODEL NUMBER
TTV038AGD01ALKS
SERIAL NUMBER
1234567890
CONTRACTOR NAME
MR GEOTHERMAL
CONTRACTOR PHONE
555-1234
PREVIOUS SAVE
INSTALLER SETTINGS
THERMOSTAT CONFIG
SYSTEM CONFIG
ACCESSORY CONFIG
INPUT DEALER INFO
HUMIDITY CONFIG
TEMPERATURE CONTROL
DEMAND REDUCTION CNFG
SERVICE MODE
SETPOINT LIMITS
RESTORE DEFAULTS
DXM2 3.3
ATC32U02 C 1.0
SELECT OPTION
PREVIOUS
Содержание iGate ATC32U03
Страница 2: ...This page was intentionally left blank...
