Tranquility
®
Water-to-Water (TMW) Series
R e v. : M a r c h 1 0 , 2 0 2 1
T H E S M A R T S O L U T I O N F O R E N E R G Y E F F I C I E N C Y
c l i m a t e m a s t e r.c o m
45
Start-Up Log Sheet
Installer:
Complete unit and system checkout and follow unit start-up procedures in the IOM. Use this form
to record unit information, temperatures and pressures during start-up. Keep this form for future reference.
Job Name:
Street Address:
Model Number:
Serial Number:
Unit Location in Building:
Date:
Sales Order No:
In order to minimize troubleshooting and costly system failures, complete the following checks and data
entries before the system is put into full operation.
Temperatures: F or C
Antifreeze: _____%
Type
of
Antifreeze:
__________________
Cooling Mode
Heating Mode
Source
Entering Fluid Temperature
Leaving Fluid Temperature
Temperature Differential
Pressure In
Pressure Out
Pressure Differential
Load
Entering Fluid Temperature
Leaving Fluid Temperature
Temperature Differential
Pressure In
Pressure Out
Pressure Differential
Compressor
Amps
Volts
Discharge Line Temperature
(6” from Compressor Outlet)
Allow unit to run 15 minutes in each mode before taking data.
Do not connect gauge lines
