Climate Technology Add-on Refrigerated Air Conditioning Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 52

Climate Technology Add-on Refrigerated Air Conditioning Скачать руководство пользователя страница 21

Multi-Appliance Comfort Control

Ducted Gas Heating

HEATER MAINTENANCE

C

LEANING

.

Warning: Before commencing any maintenance work on your unit, isolate the power at the supply
(Fuse Box).

Note: It is essential that your central heater be maintained in accordance with this manual. Failure
to do so will affect the life of the product and reduce the level of efficiency.

E

LECTRICAL

No general maintenance is required to the electrical system.

A Qualified Electrician should only carry out electrical connections and maintenance.

R

ETURN

A

IR

G

RILLE

F

ILTER

.

If your heating system has a filter in the return air grille, it is extremely important it is cleaned every 3 – 4
weeks during the operating period to ensure correct operation of the heating unit. Failure to do so may
cause your heater to stop because of over temperature and cause an unnecessary service call not
covered by warranty.

F

LUE

.

The flue and cowl assembly should be clean and free of obstructions.

SCHEDULED MAINTENANCE.

Your Ducted Gas Central Heater should be serviced annually to ensure trouble free operation.

1.

To ensure that your heater continues to operate at peak efficiency it is recommended that it be
periodically serviced by a qualified service technician

2.

Fan blades, motors should ignition systems and burners should be checked every year. Heater
cabinet and immediate surroundings should be kept clean.

3.

Replace the batteries in the Radio Frequency Comfort Controller (where fitted) at the start of each
heating season with new AAA alkaline batteries.

O

THER

I

TEMS

.

There are other items your Climate Technologies service technician will attend to on scheduled
maintenance.

Comfort Control - PNE

Page 21

«
...
19
20
21
22
23
...
»

Содержание Add-on Refrigerated Air Conditioning





















































Отзывы:

Нет отзывов