Fore Aire - 12v/48v Club Car Precedent - Installation Instructions
__ ________
7
f.
Secure Base
(B)
with Screw
(L)
in ten places, into the
previously drilled pilot holes (step 2b).
g.
Install Dome
(A)
with Screw
(K)
in four places.
h.
Flip the roof over so the underside faces up.
i.
Feed the power cable through the Harness Center Hole.
(Figure 11)
j.
Set Adapter
(C2)
onto the roof and slide into position
over the wiring harness. (Figure 12)
k.
Set Adapter
(C3)
onto the roof and slide into position as
shown. Secure with Screw
(M)
and Lock Nut
(N)
into the
rear holes in 2 places. Slide Adapter
(C2)
rearward until
the two holes line up with Adapter
(C3)
and secure with
screw
(P)
2 places. (Figure 13)
Figure 10
Figure 11
Figure 12
Figure 13
