7
6. Install Velcro Ties (J) using existing bolts 2 places as shown.
Note: The Velcro ties are intended to hold harness and
connectors when not in use. If only one Climate Caddy will
be installed, then the extra harness and connector can be
doubled back and stored under the rubber mat.
7. Connect Wiring Harness (I) to battery terminals.
a. Connect the red wire to positive battery terminal as per
battery reference guide on page 19.
b. Connect the black wire to negative battery terminal as per
battery reference guide on page 19.
c. Use cable ties to dress wire appropriately.
