10
4. Reinstall Rubber Mat.
5. Install Velcro Ties (J) using existing bolts 2 places as shown.
Note: The Velcro ties are intended to hold harness and
connectors when not in use. If only one Climate Caddy will be
installed, then the extra harness and connector can be doubled
back and stored under the rubber mat.
6. Connect Wiring Harness (I) to battery terminals.
e. Connect the red wire to positive battery terminal as per
battery reference guide on page 19.
f.
Connect the black wire to negative battery terminal as
per battery reference guide on page 10.
g. Use cable ties to dress wire appropriately.
Note: Diagrams are
representative and may
not match actual
configuration. Always
confirm correct
terminals before
hooking up the Climate
Caddy.
