15
IF USING THE CUP MOUNT (B)
a.
Depress locks on side of Cup
Mount & rotate Bottom to
disengage teeth.
b.
Place Cup Mount assembly in
dash cup holder. Insert screw
(F) with washer (G) & nut plate
(D) through the cup holder’s
drain hole (Do not tighten).
c.
Push down Cup Mount Top
Piece to set the cup mount
depth. The Lip seal will
conform to the varying dash
surface to ensure there are no
gaps. Tighten screw (F).
d.
Snap the Climate Caddy
Module onto the Cup Mount
Clip.
IF USING THE TRIPOD MOUNT (C)
a. Place the Tripod Mount onto the chosen mounting location and secure
with Self Tapping Screws (E) 3 Places.
Note: After placing the first
screw, rotate the Mount Clip to access each screw hole as shown.
b. Attach Climate
Caddy to Mount
Clip.
c. Plug Harness into
Climate Caddy.
Note: If using the
optional USB
accessory, you
will need to plug it
into the Climate
Caddy harness.
